OPAL SMART TEMPERATURE CONTROL -

Automatic or Manual Operation
The Opal Smart Temperature Control System operates in Automatic, Manual or Turbo mode.
Automatic Operation - In this mode the damper is controlled proportionally according to the difference between the desired and actual room temperature. The desired temperature is set with the up-down buttons on the remote control. This setting appears on the digital display.

Manual Operation - In this mode the damper is manually controlled and forces 1/3 or 2/3 of the maximum air flow capacity.
Setting this operation mode is done by pressing the fan / damper button on the remote control.

Turbo Operation - The dampers operate at maximum capacity, providing maximum air flow to the room.

System Modes: Closed, Heating, Cooling
The Opal Smart Temperature Control System operates in three (3) modes:

Closed

Heating - Set with operation mode selector button on the remote control

Cooling - Set with operation mode selector button on the remote control

click next to continue